Your white and new acrylic tub needs cleaning, too, once in a while, because you use them every day. Although acrylic bathtubs are a popular choice among homeowners, it tends to get dirty fast, especially if your area has hard water. Most homeowners complain about ugly rust spots covering the tub surface, and they struggle to remove rust from acrylic bathtubs. Over the years, acrylic tubs have become a hit because they can be molded in various shapes and sizes, and they are not as heavy as iron tubs.
How to clean acrylic tub is the most common question of most acrylic tub owners, and below are some of the cleaning methods you can follow:
-
Non-abrasive cleaners
You must have heard the saying that ‘using chemical cleaners on your acrylic tub will erode the surface at a lightning-fast rate.’ However, this concept is partially wrong because if you use non-abrasive cleaners, your bathtub will look shiny in no time, and it will not be harmed in any way. If you have a dishwashing detergent, you can use it to clean spots in your bathtub right away. Other than this, you can choose among Iron Out® Rust Stain Remover, CLR® Bath & Kitchen® Cleaner, Power Bathroom Cleaner, Formula 409® All-Purpose Cleaner, etc. After you have applied the cleaners and let it rest for a few minutes, you should always use a soft sponge, cloth, or terry clothing bits to prevent scratching of the surface. Some cleaners might take time to clean, but you should not lose your patience and attempt to accelerate the process by using steel wools or other abrasive scrubbers as it would do more harm than good.
Now when someone asks, ‘is scrubbing bubbles safe for acrylic tubs,’ you should tell them no on their face, no matter how messy their bathtub is. Whether you are scrubbing the bubbles or using them directly on the stain, you are damaging the tub, and soon it will lose all its polish!
-
Citrus fruits
If you expect guests within the next few hours and don’t have cleaning supplies at home, feel free to try out the DIY method. The citric acid in the fruits will not harm the acrylic surface but remember not to use any commercial acids. Cut a lime or an orange in half, remove all the seeds and apply the pulp on the areas, which need the most cleaning. Always put little pressure on the pulp to allow the juice to flow, and don’t rub the fruit on the tub walls. Let the juice do its work by penetrating deep into the tub to wipe off mold, mildew, and rust stains and wait for an odd 20 minutes. Use lukewarm water to clean off the juice, wipe it dry, and only use a soft cloth or a sponge. These were some of the easiest methods of ‘how to make a dull acrylic bathtub shine,’ If you feel that your bathtubs need some extra cleaning, follow the below-mentioned methods.
-
Green cleaning
If you are eager to know ‘how to clean acrylic tub‘ without using chemical cleaners, you can opt for the green cleaning method. For this, you would only need white vinegar, which will be readily available in your home, and you would not have to spend a fortune to stock it. Make a solution of equal quantity of water and white vinegar and then pour it inside a spray bottle. Shake the solution until it mixes appropriately and spray it over the existing stains and discolored parts of your tub. Leave it for 20-25, and then use a sponge or cleaning cloth to wipe off the mixture. Afterward, rinse the surface with plain water and then dry it off with a piece of microfiber cloth.
-
Mild stain cleaner
If you don’t get time to do Kohler acrylic tub cleaning often, you would see dirt settling down at the tub’s bottom. In time even the mild stains will become more visible, thus making you embarrassed in front of your guests. Besides vinegar and water, you would only need baking soda to clean the stains. Sprinkle baking soda on top of the stains, and then apply a mixture of vinegar and water. Now you will have to wait till you can see bubbles forming on the surface. Using a soft piece of cloth, apply a bit of pressure and rub in that area so that the texture becomes paste-like. Let the paste do its wonder for 20 minutes, and then clean the surface using plain water.
-
Magic eraser
After following all the methods, if you can still find some amount of grime sticking to the tub’s surface, you need to use a magic eraser on the acrylic tub. Wet the magic eraser with water to stimulate its properties and then squeeze it a couple of times. Wait till you see bubbles forming as only then the magic eraser has become ready to clean your tub. Use the magic eraser on an acrylic tub, put a little pressure, and then wipe off all the dirt.
-
Rust stain cleaner
Rust stains are pretty common in acrylic tubs, and thus, it is important to know ‘how to remove stains from acrylic bathtub.’ If you have a little bit of experience cleaning bathroom surfaces and tubs, you can go ahead with this procedure. Take borax and make a paste by adding in water and apply it over the stains. Now let the paste work by penetrating to remove the stains and thus wait at least 15 minutes. Using a sponge, rub the area and wait for a couple of minutes before rinsing the area with water.
Now that you know ‘how to polish acrylic bathtub,’ you should start following the methods as soon as possible. If you start cleaning your tub from today onwards, it will be new even after a few years, thus catching looks of appreciation from your house guests. Before buying any tub cleaner make sure to check its label to find whether it is acrylic-friendly.
